Make sure the mounting surface is strong enough to hold at least three times of the
camera weight.
Keep the protection film on the camera before installation and adjustment finished to avoid
possible scratch.
Properly handle the device after unpacking. Do not expose the device in humid
environment.
The following figures are for reference only, and the actual product shall prevail.
For the installation of model A, see "3.1 Installing Model A"; for the installation of model B, see
"3.2 Installing Model B"; for the installation of model C, see "3.3 Installing Model C."
3.1
Installing Model A
No.
Item
①
Mounting surface
④
Pedestal
⑦
Enclosure
Step 1
Loosen the locking screw⑧ with the supplied wrench, and then take off the pedestal
④.
3
Figure 3-1
Model A installation
Table 3-1 Installation item list
No.
Item
②
Positioning map
⑤
Self-tapping screw
⑧
Locking screw
Installation
No.
Item
③
Expansion bolt
⑥
Device
—
—
Installation 4