Remove Mid Hard Drive Tray - Dell EMC Integrated Data Protection Appliance DP4400 Service Manual

Remove mid hard drive tray

3. Hold the cover on both sides, and lift the cover away from the system.
Figure 26 Remove System cover
Follow the following procedure to remove the middle hard drive tray.
Before you begin
CAUTION
The hard drive tray is hot to touch for some time after the system has been
powered down. Allow time for the hard drive tray to cool before handling it.
Procedure
1. Disconnect all the cables from the hard drive backplane.
2. Lift the hard drive tray handles 90 degrees upward.
3. Hold the hard drive tray handles, and lift the hard drive tray out of the system.
Figure 27 Removing mid hard drive tray
Remove and replace assemblies
Remove mid hard drive tray
39