Remove the front bezel to access front panel hard drives
Remove the hard drive
You must remove the front bezel to access the drives in the front panel.
The procedure to remove the front bezel with the LCD panel and the front bezel
without the LCD panel is the same.
Procedure
1. Unlock the bezel by using the bezel key.
2. Press the release button, and pull the left end of the bezel.
3. Unhook the right end, and remove the bezel.
Figure 7 Removing the front bezel
Before you begin
1. Follow all safety guidelines.
2. If applicable, remove the front bezel.
Procedure
1. Press the release button to open the hard drive release handle.
2. Holding the handle, slide the hard drive out of the hard drive slot.
Remove the front bezel to access front panel hard drives
Remove and replace assemblies
21
Need help?
Do you have a question about the EMC Integrated Data Protection Appliance DP4400 and is the answer not in the manual?
Questions and answers