Indoor Unit Parts And Major Functions - intensity IDUFCI12KC-3 Owner's Manual

An all-pole disconnection device which has at
•
least 3mm separation distance in all pole and
a residual current device (RCD) with the rating
of above 10mA shall be incorporated in the
fixed wiring according to the national rule.
If the supply cord is damaged, it must be
•
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid a hazard.
The appliance shall be installed in accordance
•
with national wiring regulations.

Indoor Unit Parts And Major Functions

Unit Parts
Air outlet
Operating Conditions
Use the system under the following temperatures for safe and effective operation. If the air
conditioner is used under different conditions, it may malfunction or become less efficient.
COOL mode
Room Temperature
Outdoor
(For models with
Temperature
low temp. cooling
systems.)
(For special
tropical models)
Air inlet
Fig. 2.1
HEAT mode
17°C - 32°C 0°C - 30°C
(62°F - 90°F) (32°F - 86°F)
0°C - 50°C
(32°F - 122°F)
-15°C - 24°C
-15°C - 50°C
(5°F - 76°F)
(5°F - 122°F)
18°C - 54°C -7°C - 24°C
The indoor unit must be installed 2,5m above
•
floor.
This appliance is not intended for use by persons
•
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that
•
they do not play with the appliance.
Electric control cabinet
Air filter(on some models)
Drain hose
Refrigerant connecting pipe
FOR OUTDOOR UNITS
DRY mode
WITH AUXILIARY
17°C - 32°C
ELECTRIC HEATER
(62°F - 90°F)
When outside
temperature is below 0°C
(32°F ), we strongly
0°C - 50°C
(32°F - 122°F)
recommend keeping the
unit plugged in at all
time to ensure smooth
ongoing performance.
0°C - 60°C
(For special
tropical models)
2
Page 5