Afterword - ADEEPT RaspArm Manual

www.adeept.com
<TimeLapse Mode>
The name of this mode comes from a kind of photography technology. Compared with the <Keys
and Setps> mode, this mode can customize the time required for the movement between any
two positions and the number of motion decomposition in addition to the position information.
After locating, long-press I to input the time required to move to the next position, then
long-press I again to enter the number of motion decomposition to move to the next position,
and then input the next position, theoretically it can save more than 10 million positions. After
the input is completed, long-press II to exit the loop and enter the menu interface of the
selection mode.
When RaspArm is turned on, it will automatically search for known Wi-Fi. If there is one , it will
automatically connect to it. You can remotely control RaspArm through the GUI program on the
PC(You can download it from https://github.com/adeept/rasparm/). If RaspArm is not connected
to Wi-Fi after booting, it will automatically create a Wi-Fi hotspot which you can connect through
the computer. The default address of the server is 192.168.12.1, and the rest of the operation
remains unchanged.

5.Afterword

Thanks for purchasing our product and reading the manual! If you spot any errors or have any
ideas or questions for the product and this guide, welcome to contact us! We will correct them if
any as quickly as possible.
After completing all projects in the guide, you should have some knowledge of the Raspberry Pi
and Robot, thus you can try to change the robot into other projects by adding more Adeept
modules or changing the code for extended functions.
For more information about Arduino, Raspberry Pi, Smart car robot, or robotics, etc., please
follow our website www.adeept.com. We will introduce more cost-effective, innovative and
intriguing products!
Thanks again for choose Adeept product and service!
66