2/ Connecting The Heated Towel Rail - Atlantic TIMELIS CHROME Installation And Operating Manual

2/ Connecting the device
- The device must be supplied with 230V, 50Hz.
- Mains connection must be ensured using the 3-wire cable factory fitte to the heater , through a
connecting box. In damp premises, such as bathrooms and kitchens, install the connecting box at least
25cm from the ground.
- If power cable is damaged or too short, to avoid any danger it must be replaced by a qualified elec-
trician using special tools.
Heated towel rail wiring diagram
Switch the power off and connect the wires as shown in the following diagram:
Panel
heater cable
Live=brown
Neutral=blue
LIVE
NEUTRAL
17
Electricity
grid
GB