Pentair AUTOTROL MAGNUM 742 Installer Manual page 51

6.3.3.4 Day of week
Set the current day of the week.
A Press .
→ Arrow flashes.
B Select displayed day with
C Press to validate the selection and advance to the next
parameter using
6.3.3.5 Regeneration time
Set the time when regeneration will take place.
A Press .
→ Regeneration time flashes.
B Adjust displayed time with
→ Default setting: 2:00 am.
C Press to validate the selection and advance to the next
parameter using
6.3.3.6 Days override (762 controller only)
Set the number of days for calendar override.
A Press .
→ Number of days flashes.
B Adjust displayed number with
→ Default time for days override: 0 day (disabled).
→ Days can be adjusted from ½ (0.5) to 99 days.
C Press to validate the selection and advance to the next
parameter using
6.3.3.7 Days between regeneration (742 controller only)
Set the number of days between regeneration.
A Press .
→ Number of days flashes.
B Adjust displayed number with
→ Set to 0 to program as a 7-day timer.
→ Days can be adjusted from ½ (.5) to 99 days.
C Press to validate the selection and advance to the next
parameter using
Ref. MKT-IM-012 / C - 25.10.2019
and .
or .
and .
or .
and .
or .
and .
or .
Installer Manual Magnum 742-762 - Programming
51 / 106