Adjust The Phone Ringer Volume; Speed Dials - Cisco 8841 User Manual

Press Volume

Adjust the Phone Ringer Volume

If your phone ringer is too loud or too soft when you get an incoming call, you can change the ringer
volume. Changes to the ringer volume do not affect the call volume you hear when you are on a
call.
Procedure
Press Volume

Speed Dials

Speed dials allow you to call a number simply by pressing one or two pre-programmed digits.
You should always set up and manage all speed dials through the Horizon Portal to make sure
they're not deleted every time you run a system upgrade or firmware refresh. To set up speed dials,
see your Horizon Portal guide.
Save.
Page 26 of 29
right or left to adjust the volume while you are on a call.
right or left to adjust the ringer volume when the phone rings.
Horizon | Cisco IP Phone 8841/8851 and 8861 User Guide
© Gamma 2016. All rights reserved. Confidential