Technical Specifications - Siemens SIMATIC ET 200pro IO-Link Master Manual

Technical specifications

Technical specifications of the IO-Link Master
Technical specifications
Dimensions and weight
EM 4 IO-Link HF
Dimensions W x H x D (mm)
Weight
CM IO-Link 4×M12P
Dimensions W x H x D (mm)
Weight
Voltages and currents
Rated supply voltage of electronics/encoder 1L+
Reverse polarity protection
Rated load voltage 2 L+
•
•
Current consumption
•
•
•
Power loss of the module
Electrical isolation
•
•
•
•
Insulation
Insulation tested with
Status, interrupts, diagnostics
Status display
Interrupts
•
26
Reverse polarity protection
Short-circuit protection
From backplane bus
From supply voltage 1L+
From load voltage 2L+ (without load)
Between channels and backplane bus
Between channels
Between backplane bus and all other circuit
elements
Between load voltages
Diagnostic interrupt
45 x 130 x 35
Approx. 150 g
45 x 130 x 39
Approx. 115 g
24 V DC
Yes
24 V DC
Yes, per module, against destruction, loads are
activated
Yes; per channel
Max. 20 mA
Max. 40 mA
Max. 20 mA
Typ. 2.6 W
Yes
No
Yes
Yes
707 V DC (type test)
Green LED, per channel; one green LED each for
channel status Qn (SIO mode) and port status IO-
Ln (IO-Link mode)
Configurable
IO-Link Master (6ES7147-4JD00-0AB0)
Manual, 03/2018, A5E37967003-AB
6