4.2
Explanation of parameters
Group diagnostics
Enable of group diagnostics for the module.
Diagnostics port
This parameter enables the diagnostics for the selected port.
The diagnostics possible depends on the IO-Link device in use. Additional information about
the diagnostic interrupts can be found in the description of the utilized IO-Link device.
Port configuration without S7-PCT
This parameter releases the port configuration without S7-PCT for the module.
PortQualifierInformation
This parameter releases the PortQualifierInformation (PQI). The PQI provides information on
the device status of the port and IO-Link.
Operating mode
This parameter determines the mode in which the selected port should be operated.
You can select from the following options:
● IO-Link autostart
● IO-Link manual
● DI
● DQ
● Disabled
IO-Link autostart
The connected IO-Link device starts automatically (Plug&Play functionality). The IO-Link
device is immediately ready for operation.
IO-Link Master (6ES7147-4JD00-0AB0)
Manual, 03/2018, A5E37967003-AB
Parameters/address space
4.2 Explanation of parameters
19