Communication Instructions; Socket Instructions - Ebyte E810-DTU User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd E810-DTU(CAN-ETH) User Manual
The page will automatically jump to the module management page. After clicking on the module to restart, the module
will restart and the parameters set will take effect.

2.4. Communication instructions

Preparation:
One E810-DTU(CAN-ETH), one CAN analyzer(This is used to analyze, send and receive data on CAN bus. One side of
the CAN analyzer is CAN-Bus and another side is USB, which can connect to computer directly), E810-DTU(CAN-ETH)
is connected to the CAN_H,CAN_L of CAN analyzer to form the communication network. In a same one PC, the mutual
communication can be realized via the CAN analyzer and network debugging tool.

2.4.1. SOCKET instructions

1. Set the IP address of PC same as the E810-DTU(CAN-ETH) and same subnet mask. For example, the IP of PC is
192.168.4.100, the IP of module is 192.168.4.101;
PC configuration:
Copyright ©2012–2019, Chengdu Ebyte Electronic Technology Co.,Ltd
8