Ebyte E810-DTU User Manual page 11

Chengdu Ebyte Electronic Technology Co.,Ltd
2.Set the network type of SOCKET A1 to TCPS (TCP Server) and local port 8886. Click Save to restart the module.
3.Open the CAN analyzer software, select the correct COM port and baud rate, and click the "Network Debugging
Assistant" to connect the device for communication test.
The below picture shows a standard data frame sent by the network. The CAN sending ID is 0x00 0x00 0x00 0x00
0x01 and the data is 0X11 0x22 0x33 0x44 0x55. The data sent should conform to the data format (see the basic function
of CAN-Data Protocol for details).
Copyright ©2012–2019, Chengdu Ebyte Electronic Technology Co.,Ltd
E810-DTU(CAN-ETH) User Manual
11