Quick Use; Equipment Use; Default Parameters - Ebyte E810-DTU User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd

2. Quick Use

2.1. Equipment use

E810-DTU (CAN-ETH) is powered by +8~28V DC (the +12V or +24V standard power supply is recommended).
When the device is powered normally, Users can use WEB page to configure its working mode and basic operating
parameters ( See the WEB page configuration method in 4.9 WEB introduction and configuration).

2.2. Default parameters

IP Acquisition type
IP address
Subnet mask
gateway
DNS
Spare NDS
CAN baud rate
Packing time
Packing length
Filter frame type
Socket A1 Basic parameters
Socket A1 Heart Packet Mode
Socket A1 Heartbeat package content
Socket A1 Registration package mode
Socket A1 Registration package time
Socket A1 Registration package content
Socket A1 Short connection time
Socket A1 keepalive parameter
Socket A1 Empty the cache function
Socket B1 Basic parameters
Socket B1 Heartbeat packet mode
Socket B1 Heartbeat packet time
Socket B1 Heartbeat package content
Socket B1 Registration package mode
Copyright ©2012–2019, Chengdu Ebyte Electronic Technology Co.,Ltd
STATIC
192.168.4.101
255.255.255.0
192.168.4.1
61.139.2.69
192.168.4.1
100 kbps
10 (ms)
1000 (byte)
Receive all frames
TCPS,192.168.4.101,8886
NET
0(s), Turn off the heartbeat package function
heartbeat msg
Turn off
regist msg
0(s)，Turn off short connection
time/inteval/probes = 10(s)/5(s) /30(times)
OFF，Turn off
TCPC,192.168.4.100,8887
NET
0(s), Turn off the heartbeat package function
heartbeat msg
Turn off
E810-DTU(CAN-ETH) User Manual
5