Jetter JXM-MUX User Manual page 9

JXM-MUX
Modifications and
alterations to the module
Transport
Storing
Repair and maintenance
Disposal
Jetter AG
Product life cycle
Decommissioning/
disposal:
For safety reasons, no modifications and changes to the device and its
functions are permitted.
Any modifications to the device not expressly authorized by Jetter AG will
result in a loss of any liability claims to Jetter AG.
The original parts are specifically designed for the device. Parts and
equipment from other manufacturers have not been tested by Jetter AG
and are, therefore, not released by Jetter AG.
The installation of such parts may impair the safety and the proper functioning
of the device.
Any liability on the part of Jetter AG for any damages resulting from the use of
non-original parts and equipment is excluded.
The device contains electrostatically sensitive components which can be
damaged if not handled properly.
To exclude damages to the device during transport it must be shipped in its
original packaging or in packaging protecting against electrostatic discharge.
Use an appropriate outer packaging to protect the device against impact or

shock.
In case of damaged packaging inspect the device for any visible damage.

Inform your freight forwarder and Jetter AG.
When storing the device observe the environmental conditions given in the
technical specification.
The operator is not allowed to repair the device. The device does not contain
any parts that could be repaired by the operator.
If the device needs repairing, please send it to Jetter AG.
When disposing of devices, the local environmental regulations must be
complied with.
Minimum qualification
Specialized personnel with training in
electrical/automotive engineering, such as automotive
mechatronics fitters
Safety instructions
9