Basic Safety Instructions - Jetter JXM-MUX User Manual

1 Safety instructions

Basic safety instructions

Introduction
Intended use
Usage other than
intended
Personnel qualification
8
This device complies with the valid safety regulations and standards.
Jetter AG attaches great importance to the safety of the users.
Of course, the user should adhere to the following regulations:
 Relevant accident prevention regulations
 Accepted safety rules
 EC guidelines and other country-specific regulations
Intended conditions of use include operation in accordance with this User
Manual.
This device has been designed as a peripheral module for use in commercial
vehicles and mobile machines and is intended for connection to an already
existing controller. The JXM-MUX is a video splitter merging up to 4 video
signals into one video signal.
This device meets the requirements of the European Automotive EMC
Directive for electric/electronic subassemblies.
It may only be operated within the limits set forth in the technical
specifications. The operating voltage of the JXM-MUX is classified as SELV
(Safety Extra Low Voltage). Therefore, it is not subject to the EU Low Voltage
Directive.
The device must not be used in technical systems which to a high degree
have to be fail-safe.
The JXM-MUX is no safety-related part as per Machinery Directive
2006/42/EC. This device is not qualified for safety-relevant applications and
must, therefore, NOT be used to protect persons.
If you intend to operate the device at ambient conditions not being in
conformity with the permitted operating conditions, please contact Jetter AG
beforehand.
Depending on the life cycle of the product, the persons involved must possess
specific qualifications. The qualifications required to ensure safe handling of
the device at different phases of the product life cycle are listed below:
Product life cycle
Transport/storage:
Mounting/installation:
Commissioning/
programming:
Operation:
Minimum qualification
Trained and instructed personnel with knowledge in
handling electrostatically sensitive components
Specialized personnel with training in
electrical/automotive engineering, such as automotive
mechatronics fitters
Trained and instructed experts with profound
knowledge of, and experience with,
automotive/automation technology, such as
automotive engineers for mobile machinery
Trained, instructed and assigned personnel with
knowledge in operating electronic devices for mobile
machinery
Jetter AG