Product Description - Jetter JXM-MUX User Manual

JXM-MUX

Product description

Video Splitter JXM-MUX
Product Image
Product features
Scope of delivery
Jetter AG
The JXM-MUX is a video splitter merging up to 4 video signals. Up to 4
cameras can be connected to it. The signals from these cameras are routed to
the monitor. Optionally one to four video signals can be displayed on the
monitor. Supported video standards are PAL or NTSC. Each video signal from
the cameras can be mirrored, for example when a camera is used as rear
view camera.
The video splitter is controlled by a CAN interface with implemented
CANopen® protocol.
The product features are listed below:

Video system: NTSC, PAL (5 channels)

4 camera ports (5-pin MiniDIN jacks)

1 video input (RCA/cinch)

1 audio input (RCA/cinch) (not supported)

1 video output (RCA/cinch)

1 audio output (RCA/cinch) (not supported)

Controlled by a CAN interface with implemented CANopen® protocol.
The following items are included in the scope of delivery of a JXM-MUX:
Item no. Quantity
10000790
60240700
60873457
60873458
1 Video splitter JXM-MUX with power cable (2 m)
and 2 retaining clips
2 Cable snap ferrite
1 CAN cable 1 m
1 CAN terminating resistor (120 Ω) for connection to
JXM-MUX
Electrical installation
Description
13