Table of Contents
Advertisement
JXM-MUX
JXM-MUX - Installation
Mechanical installation
Jetter AG
To install the video splitter JXM-MUX, proceed as follows:
Step
1
Install the JXM-MUX in a location which has a load carrying capacity of at
least 5 kg.
2
Screw down the JXM-MUX as shown in the illustration below. When doing
so, use the screws that come with the module.
3
Plug in the camera cables, then install the retaining clips using the screws
that come with the module.
Electrical installation
Action
23
Advertisement
Table of Contents
