Switching The System On; Switching The System To Standby Mode; Dim Mode; Volume Control - Philips FW-C115/22 User Manual

Switching the system on

In standby/demonstration mode
Press STANDBY ON to switch on the last
selected source.
Press CD, TUNER, TAPE (TAPE 1/2) or
AUX.
Press OPEN•CLOSE.
The system will switch to CD mode.
Switching the system to standby
mode
In demonstration mode
Press and hold Ç on the system.
In any other source mode
Press STANDBY ON (or B on the remote
control).
The clock will appear on the display when the
system is in standby mode.

Dim mode

You can select the desired brightness for the
display.
In any source mode (except standby mode),
press DIM repeatedly to select DIM 1, DIM 2,
DIM 3 or DIM OFF display mode.
is shown, except for DIM OFF mode.
DIM
DIM Brightness
mode
1
normal
2
half
3
half
OFF
normal
pg 001-026/C115/22-Eng

Volume control

Press MASTER VOLUME 3 or 4
(VOLUME + or - on the remote control)
to increase or decrease the volume level.
To listen through the headphones
Connect the headphones plug to
the n socket at the front of the
system.
The speakers will be muted.
To switch off the volume temporarily
Press MUTE on the remote control.
Playback will continue without sound and
"MUTE" is displayed.
To restore the volume, press MUTE again or
increase the volume level.

Sound control

DSC (Digital Sound Control)

The DSC feature enables you to enjoy special
sound effects that have preset equaliser settings,
providing the best music reproduction.
Press DSC to select : OPTIMAL, JAZZ, ROCK
or TECHNO.
The selected DSC is shown.
If OPTIMAL is selected, the DBB mode will
be switched on automatically.
Spectrum

DBB (Dynamic Bass Boost)

Analyser
The DBB mode enhance the bass response.
off
Press DBB.
on
If activated,
off
displayed.
If deactivated, "DBB OFF" is displayed.
on
Note:
– Some discs or tapes might be recorded in high
modulation, which causes a distortion at high
volume. If this occurs, switch off DBB or reduce the
volume.
Automatic DSC-DBB selection
The best DBB setting is generated automatically
for each DSC selection. You can manually select
the DBB setting that best suits your listening
environment.
13
Basic Functions
is shown and "DBB ON" is
DBB
3139 115 21361
12/24/01, 9:39 AM
13