Rewinding/Fast Forwarding; General Information On Recording; Preparation For Recording; One Touch Recording - Philips FW-C115/22 User Manual

Philips mini audio system fw-c115
Hide thumbs Also See for FW-C115/22:
Table of Contents

Advertisement

Tape Operation / Recording
Rewinding / Fast forwarding
1
Stop playback, press à or á.
The tape will stop automatically at the end of
rewinding or fast forwarding.
2
Press STOP•OPEN to stop rewinding or fast
forwarding.
Note:
– During rewinding or fast forwarding of a tape, it
is also possible to select another source (CD or
TUNER, for example).
General information on
recording
For recording, use only tape of IEC type I
(normal tape).
The recording level is set automatically,
regardless of the position of the Volume, DBB,
DSC and so forth.
The tape is secured at both ends with leader
tape. At the beginning and end of the tape,
nothing will be recorded for six to seven
seconds.
To prevent accidental recording, break out the
tab on the left shoulder of the tape side you
want to protect.
IMPORTANT!
– Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
– Recording is possible only on tape deck 1.
20
pg 001-026/C115/22-Eng

Preparation for recording

1
Load a recordable tape into tape deck 1 with full
spool to the left.
2
Prepare the source to be recorded.
CD – load the disc(s).
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 2 with the full spool to the left.
AUX – connect external equipment.
When recording is in progress
REC
It is not possible to listen to another source.
It is not possible to activate the timer function
during recording or tape dubbing.

One touch recording

1
Press CD, TUNER or AUX to select the
source.
2
Start playback of the selected source.
3
Press RECORD on tape deck 1 to start
recording.
To stop recording
Press STOP•OPEN on tape deck 1.

CD Synchronised start recording

1
Press CD to select the disc.
You can programme the tracks in the order you
want them to be recorded (refer to "CD
Operation - Programming the disc tracks").
2
Press RECORD on tape deck 1 to start
recording.
The disc will start playback automatically.
To stop recording
Press STOP•OPEN on tape deck 1, then press
Ç to stop disc playback.
Note:
– During CD synchronised start recording, do not
fast forward/rewind the tape in tape deck 2.
20
starts flashing.
3139 115 21361
12/24/01, 9:40 AM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fw-c115

Table of Contents