Standard Midi Channel Assignments; Transferring And Saving Capture Memory Data To A Sequencer - Allen Organ Company Protégé LD-34 Owner's Manual

1.

Standard MIDI Channel Assignments

These are the Allen Organs' standard MIDI channels settings for the LD-34:
2.

Transferring and Saving Capture Memory Data to a Sequencer

CAPTURE MEMORY refers to all of the piston registrations on all available memories, plus
all positional secondary Crescendo "B" settings and the secondary Tutti "B" settings. With
this operation, the organist can copy and save all of this stored information to a digital MIDI
sequencer. Advance to the 'CAPTURE MEMORY SAVE' window function (see Section A-
2).
Set your sequencer to the record mode and begin recording as you normally would. Press and
hold the MEMORY button in the Console Controller™. While holding MEMORY, press
General Pistons 2-5-5 in sequence. The Capture Memory information will be transmitted to
the sequencer. During the memory data transfer process the window will display:
The 'dot' behind the word 'SENDING' on line one of the display will move as the data is
transmitted.
sending.
piston config
sending.
cresc & tuttis
Note: This procedure can take an extended period of time because of the number of capture
memories, so please be patient. Once completed, a copy of the Capture Memory information
will exist in the sequencer and the original information will be retained in the Console
Controller™ memory.
LD-34
Channel Organ Division
1 = Swell
2 = Great
3 = Pedal
8 = General
CAPTURE MEMORY
SAVE
DONE!!
sending.
capture memory
sending.
program changes
29