Allen Organ Company Protégé LD-34 Owner's Manual page 26

Shortcut: While in "SET" mode you can view the Crescendo B sequence without having to
enter the "SHOW" mode by using the Crescendo shoe. However, it is important that all
Crescendo step positions be programmed before doing this. By depressing the Crescendo
shoe, the stops/controls will move accordingly as to the step displayed. You may play the
organ while moving the crescendo shoe to hear the Crescendo sequence.
Manually disabling Celestes and Tremulants:
To manually disable the celestes and/or tremulants at any of the available Crescendo B steps
positions, advance to the 'CRESC B CUTOUT' window function (see section A-2).
Press the CURSOR button until the flashing cursor is positioned on the 'LEVEL' setting
located on line two of the display. If the LEVEL setting is set to DISABLED, turn the
ROTARY DIAL counter-clockwise to select a specific step position on which the cutout is
to occur. Otherwise, turning the ROTARY DIAL either direction will raise or lower the step
position number. To disable the Crescendo B cutout, turn the ROTARY DIAL clockwise
until the word "DISABLED" appears.
Note: Registrations and/or the memory settings for the PISTONS are not affected by
resetting the Crescendo B.
Play Organ Using Secondary Crescendo B
The Main Window function must be displayed (see Section A-2). Press the CRES. B piston.
On the bar-graph display, the green CRESC-B indicator will illuminate. Push open the
Crescendo shoe and play.
Editing Tutti B Registrations
Advance to the 'CRESC/TUTTI B' window function (see Section A-2). The display will
automatically revert to "SET" mode when pressing either Tutti piston if in the "SHOW"
mode.
To view a Tutti registration, press either Tutti piston. The display will indicate which Tutti
was selected.
You may now view/edit the Tutti registration. To save any changes press and hold the SET
piston. Then, while holding SET, press the MEMORY button in the Console Controller.
The display will briefly flash the word "DONE!!" on the first line. Release both the SET
piston and MEMORY button. The new Tutti registration is now stored as the Tutti number
indicated in the display.
CRESC B CUTOUT
LEVEL: DISABLED
CRESC/TUTTI B
SET step --
26