Advancing Through The Windows; Selecting The Capture Memories - Allen Organ Company Protégé LD-34 Owner's Manual

Then finally the Main Window function is displayed:
Important: The Allen Organ includes several self-testing features. If a warning is displayed
in this sequence, you should contact your Allen authorized representative immediately!

2. Advancing Through the Windows

The Allen Organ operating software contains many settings that are user-programmable.
Each setting can be programmed via the Console Controller's™ display. These settings are
divided up into many window functions. To advance the Console Controller's™ display to the
next window function, press the CURSOR button until the blinking CURSOR is over the
abbreviation MEM in the display. Once the cursor is positioned, slowly turn the ROTARY
DIAL clockwise, the display will advance to the next window function. When the second
window function is displayed, rotate the ROTARY DIAL counter-clockwise, the window
will return to the Main window display function. Turn the ROTARY DIAL counter-
clockwise again and the last window function will display. The window functions "wrap
around" for ease of accessing parameters quickly.
Remember:
function at any time by pressing and holding the SET
piston. Then, while holding SET, press the CANCEL
piston, then release both pistons.
always return the Console Controller's display to the Main
Window function.
Repeat this procedure to advance through all of the windows. The last window function will
display:

3. Selecting the Capture Memories

Locate the CURSOR button on the face of the Console Controller™. Press this button to
move the cursor to the first number to the right of the abbreviation "MEM" on the display.
Once the cursor is positioned on the memory number, turn the ROTARY DIAL clockwise to
select the memories sequentially from MEM 1, to MEM 2, to MEM 3. Or, turn the
ROTARY DIAL counter-clockwise to select the memories sequentially from MEM 1, to
MEM 16 (see Note 2 below), to MEM 15.
The capture memories allow you to save different registrations on each piston/toe piston.
This means General Piston 1 on MEM-1 may be totally different from General Piston 1 on
MEM-2, MEM-3, etc.
MEM - 1
You may return to the Main Window
UNLOCK ALL
CAPTURE MEMORIES
┌┐
└┘
This procedure will
17