Return Capture Memory Data From A Sequencer To The Organ; Transmission/Reception Of Individual Stop Data - Allen Organ Company Protégé LD-34 Owner's Manual

3.

Return Capture Memory Data from a Sequencer to the Organ

To replace previously recorded Capture Memory information into the organ from your
sequencer, simply press "Play" on the sequencer and the recorded capture data will
automatically be transmitted to the organ. You must have a MIDI cable connected from the
OUT port of the sequencer to the IN port of the Allen Organ. It does not matter what window
function the Console Controller displays.
Note: The Capture Memories must be unlocked (see section A-6) before you press "Play" on
the sequencer, allowing the organ's available memories to receive capture information. It is a
good idea to first save whatever is stored in the organ's memory because, it will be erased by
this procedure.
Note: The 'dot' on line two of the display will move as data is received.

4. Transmission/Reception of Individual Stop Data

Note: This function is listed specifically for the recording/playback of MIDI sequences using
an external MIDI sequence recorder.
This function allows the organist to turn on/off the transmission and reception of individual
stop data, known in MIDI terminology as "Non-Registered Parameters".
Note: Piston changes will still be transmitted and received, because they are classified as
program changes.
Advance to the 'TRANSMIT / RECEIVE STOPS' window function:
To change the on/off status of the Transmit/Receive Stops function, press the CURSOR
button until the flashing cursor is positioned on the status control value. Turn the ROTARY
DIAL to turn the transmit/receive status on/off.
RECEIVING DATA
..
TRANSMIT/RECEIVE
STOPS ON
30