Sf73 Disk Drive, Front View; Sf73 Disk Drive Enclosure Removal Procedure - Digital Equipment VAXft Systems 810 Service Information

Figure 5–22 SF73 Disk Drive, Front View
d i g i t a l
Write DSSI
Ready Protect Fault
ID
Table 5–19 SF73 Disk Drive Enclosure Removal Procedure
Step Action
1 Ask the operator or system manager to dismount the drive.
2 Turn off the disk drive enclosure.
3 Disconnect the power cable from the rear of the drive. See Figure 3–9.
4 Disconnect the two DSSI cables from the rear of the drive. See Figure 3–9.
5 Remove the mounting screws from the retainers that secure the drive enclosure
in the cabinet. See Figure 5–23.
6 Slide the disk drive enclosure out of the expansion cabinet.
7 Remove the retainer screws that secure the retainers on the disk drive
enclosure. See Figure 5–23.
8 Loosen the captive screws that secure the front cover on the disk drive
enclosure. See Figure 5–22.
9 Disconnect all cables from the disk ISE. Slide the disk ISE out of the disk drive
enclosure. See Figure 5–24.
DSSI Write
Ready Fault
ID Protect
Error Handling and Analysis 5–33
C a p t i v e S c r e w s
F r o n t C o v e r
D o o r
C a p t i v e S c r e w s
M R - 0 0 3 5 - 9 3 D G