Service Procedures
Removing the IDE Hard Disk Drive
To remove the IDE hard disk drive:
1)
Turn off the computer.
2)
Disconnect external devices, ac power and monitor power.
3)
Remove cover.
4)
Remove metal filler plate.
5)
Remove four screws securing hard disk drive to device bay.
6)
Disconnect power and ribbon cables.
7)
Slide drive toward rear of computer to clear guide tab on left side.
8)
Lift front of device up and over guide tab and slide drive out of the front of the chassis.
Refer to "Connecting Diskette and IDE Devices".
Figure 3 - 8 Removing the IDE Hard Disk Drive
42
Digital STARION 400i - 900i PC
MCS Logistics Engineering - Nijmegen