Lenovo ThinkSystem SR950 Setup Manual page 234

Install a memory air baffle
Memory air baffles are in the system boards that are accessed from the front of the server.
S002
CAUTION:
The power control button on the device and the power switch on the power supply do not turn off the
electrical current that is supplied to the device. The device also might have more than one power
cord. To remove all electrical current from the device, ensure that all power cords are disconnected
from the power source.
CAUTION:
Make sure that all server power cords are disconnected from their power sources before performing
this procedure.
Complete the following steps to install a memory air baffle:
Watch the procedure. A video of the installation process is available:
•
YouTube
• Youku
Figure 102. Memory baffle installation
Attention: To prevent damage to memory modules and memory module sockets, you must open the
retaining clips at both ends of each memory module.
230
ThinkSystem SR950 Setup Guide