Lenovo ThinkSystem SR950 Setup Manual page 216

Hide thumbs Also See for ThinkSystem SR950:
Table of Contents

Advertisement

If you are not installing another hard disk drive backplane after you remove the hard disk drive backplane:
• Install the fan cage. See "Install a fan cage (upper tray)" on page 200.
• Install the upper compute tray or storage tray. See "Install a compute tray" on page 190 or "Install the
storage tray (fully removed)" on page 256.
• Install the front cover. See "Install the front cover" on page 205.
If you are instructed to return the backplane, follow all packaging instructions and use any packaging
materials that are provided.
Remove a hard disk drive backplane (lower tray)
Hard disk drive backplanes in the lower compute tray are accessed from the front of the server. There are
several types of hard disk drive backplane. Steps that are backplane specific are noted in each procedure.
S002
CAUTION:
The power control button on the device and the power switch on the power supply do not turn off the
electrical current that is supplied to the device. The device also might have more than one power
cord. To remove all electrical current from the device, ensure that all power cords are disconnected
from the power source.
CAUTION:
Make sure that all server power cords are disconnected from their power sources before performing
this procedure.
Before you remove the hard disk drive backplane:
1. Remove the front cover. See "Remove the front cover" on page 205.
2. After noting their locations, remove any hard disk drives that are installed in the lower compute tray. See
"Remove a hard disk drive" on page 206.
3. Remove the lower compute tray. See "Remove a compute tray" on page 188.
4. Remove the fan cage. See "Remove a fan cage (lower tray)" on page 199.
5. Move or remove the storage interposer to access the hard disk drive backplanes. See "Remove a
storage interposer (lower tray)" on page 250.
6. Move cables and harnesses to provide a clear path for accessing the hard disk drive backplanes and
their connectors.
Complete the following steps to remove the hard disk drive backplane:
Watch the procedure. A video of the replacement process is available:
YouTube
Youku
212
ThinkSystem SR950 Setup Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents