CAUTION:
Make sure that all server power cords are disconnected from their power sources before performing
this procedure.
Before you remove a LOM adapter from slot 9:
1. Disconnect and label all cables connected to adapters in the I/O tray; then, remove the I/O tray. See
"Remove the I/O tray" on page 218.
2. Remove the riser for slot 10 to 15 (riser 2) to access the adapter connectors in the I/O tray. See "Remove
the riser for slot 10 to 15 (riser 2)" on page 238.
Complete the following steps to remove a LOM adapter from slot 9.
Watch the procedure. A video of the installation process is available:
•
YouTube
•
Youku
178
ThinkSystem SR950 Setup Guide