Garmin Force User & Maintenance Manual page 8

Mount Base Parts
Item Description
Mount base rails
Mount base shrouds
Motor bumper
Mount base
Mount base stow support S00-01000-47
Service Procedures
Replacing the Pull Cable
You can replace the pull cable without disassembling the motor.
1
If necessary, remove the handle from the pull cable
(Removing the Pull Cable Handle, page
2
Remove the pull cable from the mount
Cable, page 9).
3
Install the new pull cable on the mount
Cable, page 9).
4
Install the handle on the new pull cable
on the Pull Cable, page
8
Service Part Number
50 in. model: S00-01000-33
57 in. model: S00-01000-34
S00-01000-14
S00-01000-19
50 in. model: S00-01000-05
57 in. model: S00-01000-10
8).
(Removing the Pull
(Installing a New Pull
(Installing the Handle
9).
Details
Replacing the Mount Rails, page 25
Replacing the Mount Shrouds, page 24
Replacing the Mount Bumper, page 25
This replacement part includes the base and all of the plastic parts, including the
shrouds, rails, stow support, and motor bumper, fully assembled.
Replacing the Mount Base, page 24
Replacing the Stow Support, page 25
Removing the Pull Cable Handle
1
Using a #1 Phillips screwdriver, remove the two screws
that secure top of the handle.