Getting Started Deploying the Motor from the Stowed Position Disengage the safety strap. WARNING Pull the pull-cable back until it stops to release the latch, and Do not run the motor when the propeller is out of the water. continue to hold it tight. Contact with the rotating propeller may result in severe injury.
See the online owner's manual for more information (Downloading the Manuals from the Web, page Operation You can use the remote control, the foot pedal, a compatible Garmin chartplotter, or any combination of these devices to ® operate the trolling motor.
Press to mark a waypoint. propeller Release to disable the propeller. control 1 through 4 Press to open the shortcut for the Garmin chartplotter Speed wheel Rotate the wheel away from you to increase the assigned to the key. propeller speed or cruise control speed.
Release . You can connect the trolling motor wirelessly to a compatible Garmin chartplotter on your boat. After you connect to a Basic Configuration compatible chartplotter, you can control the trolling motor from You should perform these basic configuration procedures before the chartplotter in addition to the remote control and foot pedal.
(traveling on gravel roads, for example) you should perform these tasks more often during the season. For detailed procedures and information on service and replacement parts, download the Force Trolling Motor Maintenance Manual from www.garmin.com/manuals/force _trolling_motor.
Page 8
® , ECHOMAP ™ , and Force ™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin. Wi‑Fi ® is a registered mark of Wi-Fi Alliance Corporation. May 2019...
Need help?
Do you have a question about the Force and is the answer not in the manual?
Questions and answers