Replacing The Mount Rails; Replacing The Mount Bumper; Replacing The Stow Support - Garmin Force User & Maintenance Manual

2
Secure the replacement shrouds to the mount base using the
screws provided with the replacement shrouds.

Replacing the Mount Rails

Before you can replace the mount rails, you must remove the
shrouds from the mount base
page 24).
1 Slide the two mount rails off of the mount base.
2
Slide the replacement rails onto the mount base.
3
Reinstall the shrouds.

Replacing the Mount Bumper

1
Using a 4 mm hex bit or wrench, remove the two screws that
secure the mount bumper to the mount base.
2 Install the replacement mount bumper, and secure it to the
mount base using the screws provided with the replacement
part.

Replacing the Stow Support

1
Using a 4 mm hex bit or wrench, remove the screws securing
the stow support to the mount base.
2
Install the replacement stow support using the screws
provided with the replacement part.
© 2019 Garmin Ltd. or its subsidiaries
(Replacing the Mount Shrouds,
Garmin ® , the Garmin logo, and ActiveCaptain
subsidiaries, registered in the USA and other countries. Force
Ltd. or its subsidiaries. These trademarks may not be used without the express
permission of Garmin.
DuPont ™ and Teflon ® are trademarks of E. I. du Pont de Nemours and Company or its
affiliates.
® are trademarks of Garmin Ltd. or its
™ is a trademark of Garmin
25