Getting Started With Your Synthetic Ruby Identifier - PRESIDIUM Synthetic Ruby Identifier User Handbook Manual

1. Getting started with your
Synthetic Ruby Identifier
1.1 Powering up your device
The Synthetic Ruby Identifier can be powered either by the use
of batteries or through the USB cable connected to the Presidium
Universal Power Adaptor that are both included with your product, or
to an external power source.
If batteries are used, you can locate the battery well at the bottom of
the unit. Release the two catches on the battery cover and remove the
battery cover to reveal the battery well. (Fig 1.1)
4 AAA batteries are needed to power the device. Do take note of the
positive (+) and negative (-) directions of the batteries when inserting
them into device. The use of alkaline batteries is recommended
as it should generally give 2.5 hours of continuous operation with
approximately 900 tests.
Fig.1.1 Removing the battery cover to reveal the battery well
12