Precautions; Accessory List; Installation; Caution Concerning The Installation Location - Alpine HALO11 Manual

01GB00-US.book Page 3 Monday, April 27, 2020 5:11 PM

Precautions

• Be sure to disconnect the cable from the (–) battery post before
installing your unit. This will reduce any chance of damage to the
unit in case of a short-circuit.
• Be sure to connect the color coded leads according to the
diagram. Incorrect connections may cause the unit to
malfunction or damage to the vehicle's electrical system.
• When making connections to the vehicle's electrical system, be
aware of the factory installed components (e.g. on-board
computer). Do not tap into these leads to provide power for this
unit. When connecting the unit to the fuse box, make sure the
fuse for the intended circuit of the unit has the appropriate
amperage. When in doubt, consult your Alpine dealer.
• The unit uses female RCA-type jacks for connection to other
units (e.g. amplifier) having RCA connectors. You may need an
adaptor to connect other units. If so, please contact your
authorized Alpine dealer for assistance.
• Be sure to connect the speaker (–) leads to the speaker (–)
terminal. Never connect left and right channel speaker cables to
each other or to the vehicle body.

Accessory List

Main unit............................................................................................................. 1
Display unit ........................................................................................................ 1
Owner's Manual ......................................................................................... 1set
<Cables>
Power cable........................................................................................................ 1
USB extension cable ....................................................................................... 1
PRE OUT cable................................................................................................... 1
Microphone ....................................................................................................... 1
<Main unit mounting parts>
Flush head screw (M5×8) .............................................................................. 4
Screw (M5×8) .................................................................................................... 4
HDMI Fixation Bracket.................................................................................... 1
<Display unit mounting parts>
POWER PLATE.................................................................................................... 1
Cover rear L ........................................................................................................ 1
Cover rear R........................................................................................................ 1
Flush head screw (M4×13) ....................................................................2(
Screw (M4×6) .............................................................................................7(
Screw (M3×4) .............................................................................................2(
• Amounts of Display unit mounting parts marked with * include
spare parts provided in case of loss. Store them safely.
*1 Number of spares for up-down adjustment of the Display.
*2 Includes 3 spares for fixing and adjusting the angle of the Display.
*3 Includes 1 spare for fixing the Cover middle.
01GB04-US_EN.fm

Installation

Mounting
Consult "Position Adjustment and Mounting Dimensions
of the Display" (page 17) in advance so that this unit does
not obstruct your field of vision or impair driving when
mounted.
Caution
• Do not block the unit's fan, thus preventing air
circulation. If blocked, heat will accumulate inside
the unit and may cause a fire.
<example>
Air ventilation hole
Rear of the Unit
• When installing the display unit and main unit, do not
touch the connectors with your hands.
<Display unit>
Connectors

Caution concerning the installation location

Angle of installation
Install at an angle between horizontal and 45°. Note that installing at
an angle outside of this range will result in a loss of performance and
* 1)
possibly damage.
*
2)
*
3)
ALPINE iLX-F411/iLX-F409 M3514702010 (EN)
<Main unit>
0 - 45°
3
-EN
EN
FR
ES