Setting The Clock; Setting Sleep/Wake-Up Timer; Sleep Timer Setting; Wake-Up Timer Setting - Philips MCD906/93 User Manual

Other Functions

Setting the clock

1
In Standby mode, press and hold CLOCKon
the remote control until the time flashes on the
display.
➜ "SET CLOCK" is displayed briefly. Then, the
hour digits flash on the display screen.
2
Turn VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote control to set
the hours.
3
Press CLOCK to confirm.
➜
The minute digits flash on the display screen.
4
Turn VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote control to set
the minutes.
5
Press CLOCK again to confirm the clock
setting.
Notes:
– This system only supports 24-hour mode.
– The clock setting will be erased when the
system is disconnected from the power supply.
– The system will exit clock setting mode if no
button is pressed within 30 seconds.

Setting sleep/wake-up timer

Sleep timer setting

In power-on mode, the sleep setting enables
the system to switch to standby mode
automatically at a preset time.
1
In power-on mode, press SLEEP on the remote
control repeatedly to select a preset time.
➜
The selections are as follows (time in
minutes):
-- ➜ 10 ➜ 20 ➜ 30 ➜ 40 ➜ 50 ➜ 60 ➜ 70 ➜
80 ➜ 90 ➜ --
2
When you reach the desired length of time, stop
pressing SLEEP.
➜
"SLEEP" appears.
30
To deactivate the sleep timer
●
Press SLEEP repeatedly until "00" is displayed,
or press STANDBY-ON B (B on the
remote control).
In standby mode, the timer setting enables
the system to switch on automatically at a set
time.

Wake-up timer setting

IMPORTANT!
– Before setting the timer, ensure that
the clock is set correctly.
1
Press and hold TIMER until the time flashes on
the display.
➜ "SET TIMER" scrolls. Then, the hour digits
flash on the display screen.
2
Turn VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote control to set
the hours.
3
Press TIMER to confirm.
➜
The minute digits flash on the display screen.
4
Turn VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote control to set
the minutes.
5
Press TIMER to confirm the time setting.
➜
"OFF" flashes on the display screen.
6
Turn VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote control to
select "ON".
➜
icon appears on the display screen.
To deactivate the timer
●
Select "OFF" at Step 6.