Table of Contents
Advertisement
IMPORTANT!
– Depending on the DVD or VIDEO CD,
some operations may be different or
restricted.
– Do not push on the disc tray or put
any objects other than disc on the disc
tray. Doing so may cause the disc player
malfunction.
– If the inhibit icon (ø) appears on the
TV screen when a button is pressed, it
means the function is not available on
the current disc or at the current time.
Region Codes
DVDs must be labeled as shown below in order
to play on this DVD system. You cannot play
discs that are labeled for other regions.
Note:
– If you are having trouble playing a certain disc,
remove the disc and try a different one. Improper
formatted disc will not play on this DVD Player.
Playing discs
1
Connect the power cords of the system and TV
(or any optional stereo or AV receiver) to a
power outlet.
2
Turn on the TV power and set to the correct
Video In channel. (See "Setting up the TV").
3
Press STANDBY -ON B on the DVD Player
front panel or B on the remote control.
➜
You should see the blue Philips DVD
background screen on the TV.
4
Press ç to open the disc tray and load in a disc,
then press the same button again to close the
disc tray.
➜
Make sure the label side is facing up.
5
Playback will start automatically (depending on
the disc type).
➜
If a disc menu appears on the TV, see "Using
the Disc Menu".
➜
If the disc is locked by parental control, you
must enter your four-digit password. (See
"PASSWORD SETUP PAGE").
6
At any time, simply press 9 to stop playback.
Disc Operations
Using the Disc Menu
Depending on the disc, a menu may appear on
the TV screen once you load the disc.
To select a playback feature or item
●
Use 1 (22) / 2 (33) / 3 / 4 and OK or
Numeric Keypad (0-9) on the remote.
➜
Playback will start automatically.
To access or exit from the menu
●
Press MENU on the remote control.
For VCD with Playback Control (PBC)
feature (version 2.0 only)
PBC playback allows you to play Video CDs
interactively, following the menu on the display.
●
During playback, press MENU.
➜
If PBC was ON, it will switch to OFF and
continue playback.
➜
If PBC was OFF, it will switch to ON and
return to menu screen.
Basic playback controls
Pausing playback (DVD/VCD/CD/MP3/
DivX/WMA)
1
During playback, press É Å .
➜
Playback will pause and sound will be muted.
2
Press É Å again to resume.
Selecting a track/chapter/title (DVD/
VCD/DivX/CD)
1
Press ™ during playback to go to the next
chapter/track
2
Press ¡ to go to the previous chapter/track.
3
To go directly to any chapter/track/title, enter the
chapter/track/title number using the Numeric
Keypad (0-9).
Resuming playback from the last
stopped point (DVD/VCD/CD)
●
In stop mode and when a disc has not been
removed, pressÉ Å .
21
Advertisement
Table of Contents
