Radio Reception
Tuning to radio stations
1
Press STANDBY-ON B (or B on the
remote control) to switch on the last selected
source.
2
Press SOURCE (TUNER on the remote
control) to select TUNER (FM) mode.
3
Press and hold 1 (22) / 2 (33) until the
frequency indication starts to change, then
release.
➜
The system automatically tunes to the next
strong radio station.
●
To tune to a weak station, press 1 (22) / 2
(33) briefly and repeatedly until an optimal
reception is found.
4
Repeat Step 3 if necessary until you find the
desired radio station.
Presetting radio stations
You can preset up to 20 stations regardless of
the reception.
Automatic progamming
●
Press PROGRAM on the remote control for
more than two seconds to activate
programming.
➜
All available stations are programmed.
Manual progamming
1
Tune to your desired radio station (refer to
"Tuning to radio stations").
2
Press PROGRAM on the remote control.
➜
"PROG" icon flashes.
3
Press ¡ / ™ to select the desired preset number.
➜
If "PROG" icon goes off before you select the
desired preset number, press PROGRAM on
the remote control.
4
Press PROGRAM on the remote control again
to store the radio station.
●
Repeat steps 1-4 to store other radio stations.
Other Functions
Listening to preset radio stations
●
In tuner mode, press ¡ / ™ to select the desired
preset number.
➜
The preset number, radio frequency, and
waveband are displayed.
29