Maintenance - PANCONTROL PAN 600AD+ Manual

9. Maintenance

Only authorized service technicians may repair the instrument.
If the instrument is malfunctioning, please test:
- Battery condition and polarity
- Condition of the fuse(s) if available.
- Condition of the test leads.
Changing the battery(s)
Replace the battery(s) when the battery symbol or BATT is displayed on the
LCD.
Attention!
Always switch off the appliance and remove the test leads from all
voltage sources before opening the device to exchange the battery or the
fuse.
•
Open the battery or fuse compartment with a suitable screwdriver.
•
Replace the battery. Mind the correct polarity.
•
Close the battery compartment.
•
Disposal of the flat battery should meet environmental standards.
Cleaning
If the instrument is dirty after daily usage, it is advised to clean it by using a
humid cloth and a mild household detergent. Prior to cleaning, ensure that
instrument is switched off and disconnected from external voltage supply and
any other instruments connected. Never use acid detergents or dissolvent for
cleaning.
EN 16