Liter Models - Graco G3 Instructions Manual

Stirring paddle replacement kit

Hide thumbs Also See for G3:

Enlarged version

4. Remove reservoir (a) and o-ring (b) from (F

Discard o-ring (b).

2 Liter Models

4 Liter and Larger Models

. 3

5. Step 5 (a - d) is for G3 Pumps with a follower

plate ONLY:

a. Verify the following parts were removed with

reservoir (F

. 4):

• Spring (S)

• Follower Pate (FP)

• Follower Plate Seal (FPS)

• Rod (R)

3A0535C

. 3).

. 4

b. Remove any parts still installed in the G3 base.

c. Be sure parts remaining in reservoir were

removed to reuse them for reassembly.

d. Examine follower plate seal (FPS) for wear or

damage. If it is damaged, it must be replaced.

Part No. 278139 is available from Graco. Con-

tact customer service to order this part or your

local Graco distributor.

NOTE: For models that include a Low Level paddle

and/or follower plate, be careful when removing stirring

paddle from G3 that bearing (2) does not fall into the

unit.

6. For all installations, turn paddle (d) clockwise to

loosen and remove it from G3 base (F

. 5

Instructions

FPS

. 5).