Remote Sms Interface Description; Query Current Status Of Module Module.all; Remote Sms Syntax; Description - Huawei EM770W At Command Interface Specification

15
Make sure the settings of <mode> and <mt> fields of +CNMI command are 1 and 4.
The value is the default value, please don't change them if you want to use the remote
SMS functionality. In order to confirm it, can use AT command like follow:
At+CNMI?
+CNMI: 1,4,0,0,0

15.1 Query current status of module Module.all

15.1.1 Remote SMS Syntax

SMS content
Module.all

15.1.2 Description

This remote SMS is used to query the current status of module.

15.1.3 Defined Values

<rscp>: 0~65535, used to indicate the GSM/WCDMA RSSI value.
<ecio>: 0~65535, used to indicate the WCDMA ecio value. Only valide for WCDMA
mode.
<cell_id>: uint32 format, used to indicate the current service cell.
<psc_code>: used to indicate the primary scrambling code of current service cell.
< current_band_freq >: current frequency of the bands.
Issue 18 (2009-06-22)

Remote SMS Interface Description

Possible response(s)
Now in WCDMA mode.
RSCP:<rscp>,ECIO:<ecio>,CELL_ID:<cell_id>,PSC
code:<psc_code>,Frequency:<current_band_freq>
Now in GSM mode.
CELL_ID:<cell_id>, Frequency:<current_band_freq>
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
AT Command Interface Specification
Page 150 of 169