Start Autoconnecting %Ipautocon - Huawei EM770W At Command Interface Specification

<backoff duration>:
0~60 (min) : Interval of PPP autoconnecion.The default value is 0.
< Connection Check Method >: The defult value is 1.
0
1
< Connection Check Period > : The default value is 30.
10~36000 (s) : Interval of PPP autoconnecting
< TCP Mode > : TCP link mode,The default value is 0.
0
1
2
< Send Delay Time >: The default value is 10
10~36000 (0.1s) : Delay time of sending data
< MTU >: The default value is 100 bytes
0~1500 : Maximum length of data packet.
< Inactivity Time >: The default value is 60 minutes
0~120 : maximum Inactivity time after connected.
< Retry Timer after TCP fail >: The default value is 3 minutes.
0~30: Maximum interval of reconnecting after disconnecting for net condition or any
other reasons.
Note: The parameter is no use now.
< PPP Inactive Time >: The default value is 60 minutes.
0~1440: Period Stack will wait before disconnecting PPP connection if there is no
activity for this set period of time.

13.11 Start autoconnecting %IPAUTOCON

Issue 18 (2009-06-22)
: Disable keepalive timer
: Enable keepalive timer
: server mode
: client mode
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
AT Command Interface Specification
Page 137 of 169