14
14.1 STK Set Facilities %STSF
14.1.1 Command Syntax
Command
%STSF=<mode>
%STSF?
%STSF=?
14.1.2 Description
This command is used to set STK functionality: enable and disable STK functionality.
14.1.3 Defined Values
<mode>: the mode of STK functionality
14.2 STK Indication %STIN
14.2.1 Command Syntax
Command
Issue 18 (2009-06-22)
STK Service Interface Description
0
disable the functionality(default)
1
enable the functionality
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
AT Command Interface Specification
Possible response(s)
OK
+CME ERROR:<err>
<CR><LF>%STSF:<Mode><CR><LF><CR><LF>O
K<CR><LF>
<CR><LF>%STSF:(list
<CR><LF><CR><LF>OK<CR><LF>
Possible response(s)
% STIN: <CmdType>,<CmdIndex>,<isTimeOut>
of
supported
<mode>s)
Page 145 of 169