Example; Stk Give Response %Stgr; Command Syntax - Huawei EM770W At Command Interface Specification

<CmdIndex>: (0-12) the index of command type

14.3.4 Example

%STIN:0,0
AT%STGI=0,0
%STGI:"SIM TOOLKIT MAIN MENU"
%STGI:1,3,"BANK",0
%STGI:2,3,"QUIZ",0
%STGI:3,3,"WEATHER",0
OK

14.4 STK Give Response %STGR

14.4.1 Command Syntax

Command
%STGR=<CmdType>,<Cm
dIndex>
<Data>]
%STGR?
%STGR=?
Issue 18 (2009-06-22)
2 STK card has already sent a 'Get Inkey' command
3 STK card has already sent a 'Get Input' command
4 STK card has already sent a 'Setup Call' command
5 STK card has already sent a 'Play Tone' command
6 STK card has already sent a 'Set Item' command
7 STK card has already sent a 'Refresh' command
8 STK card has already sent a 'Send SS' command
9 STK card has already sent a 'Send SMS' command
10 STK card has already sent a 'Send USSD' command
11 STK card has already sent a 'LAUNCH BROWSER' command
12 STK card has already sent a 'SET UP IDLE MODE TEXT' command
99 STK card has already sent a 'End Session' command
[,<Result>,
Commercial in Confidence
HUAWEI UMTS M2M Module V100R001
AT Command Interface Specification
inform the Main Menu of STK card
user get the Main Menu
Possible response(s)
OK
+CME ERROR: <err>
%STGR:0,0
[...]
+CME ERROR: <err>
%STGR: (0-12,99),(0-8)
OK
Page 148 of 169