Clock/Timer; About Clock; Setting The Clock - Philips MZ-1100/25 Owner's Manual

Clock/Timer

IMPORTANT!
When in Eco Power standby mode, it is
not possible to view or set the
clock/timer.
Notes:
– The clock/timer setting will be cancelled when
the power cord is disconnected or if a power failure
occurs.
– During clock/timer setting, if no button is
pressed within 90 seconds, the system will exit the
setting mode automatically.

About Clock

The clock can be set in either 12-hour or
24-hour mode ("11:59
PM
example).
ö Setting the clock
If you press and hold S T for more than
two seconds, it will change the minutes in faster
speed. The changes in minutes will rollover to
the hours, refer to the example shown below.
AMPM AMPM
11:59 12:00
î
23:59 00:00
î
To check the time in other source mode
Press CLK/TIMER once.
To exit without storing the setting
Press Ç.
18
" or "23:59", for
AMPM
12:01
î
00:01
î
In standby mode,
/
select clock
mode
set minutes
and hours
3139 115 21642