Opening The Mixx; Assembling The Canopy; Assembling The Front Wheels - Nuna mixx2 Instructions Manual

Opening the MIXX

Before setting up the stroller, flatten the carton and place it
on the floor.
1
- Open the storage latch as shown.
2
- Rotate the handle (1)
clicks into the open position.
Squeeze the handle
rotate the backrest to the upright position.
CHECK that the stroller is completely latched open before
continuing.

Assembling the Canopy

3
- Line up the canopy visor zipper with the zipper on the
inside of the front edge of canopy. Completely zip the
canopy visor onto the front of canopy.
4
- Insert the canopy clips into the canopy mounts on the
sides of the stroller until they click into place.

Assembling the Front Wheels

5
- Push wheels onto the front leg tubes until they click
into place.
CHECK that wheels are securely attached by
pulling down.
6
- To remove front wheels, press the button and pull
wheel down.
12
2
to the rear of the stroller until it
(2) on the back of the seat and
1
2
2
1
3
4
5
6
13