Adjusting The Recline; Adjusting The Calf Support - Nuna mixx2 Instructions Manual

Hide thumbs Also See for mixx2:
Table of Contents

Advertisement

Available languages

Available languages

Adjusting the Recline

1
- There are 5 positions for the backrest.
To recline the backrest, squeeze the adjustment
handle, and pull seat down to desired position.
To raise the backrest, squeeze handle and rotate seat
to upright position.

Adjusting the Calf Support

The calf support has 3 positions.
2
- To raise the calf support, lift it up as shown.
3
- To lower the calf support, press in both buttons on the
sides and rotate the calf support downward.
Full Reclined Position
WARNING
• Child may slip into leg openings and strangle.
• NEVER use in full reclined position unless the calf
support is raised to cover the front opening.
• DO NOT use enclosure with an older child that can push
up on hands and knees or crawl out.
When using the stroller in fully reclined position, follow
these steps:
4
- Remove the arm bar.
5
- Fully recline seat, rotate footrest to upright position
and unfasten the flaps underneath the calf support.
6
- Fasten the flaps to the snaps on the inside of the
seating area on both sides of the seat.
20
1
2
3
4
5
6
21

Advertisement

Table of Contents
loading

Table of Contents