Amico SSM Arm Installation And Adjustment Instructions

Installation and Adjustment Instructions
Quick Setup
SSM MONITOR ARM
Side-to-Side Monitor (SSM) Arm
1. Monitor Mounting Adapter
(Pg.12-18)
VESA LCD mount shown, other options available
2. Monitor Head - Rotation (Pg. 22)
It is the responsibility of the end user to ensure all aspects of the installation are covered by following the full manual at:
Monitor Rotation Adjustment
http://www.amico.com/pdf/accessories/SSM_Manual_Web.pdf
3. SSM Joint (Pg. 20)
Rotates the Monitor Head to the desired
Installation Tools & Reference
position
4. Mounting Adapter (Pg. 6-9)
MON adapter shown for MRS rail
5. MRS Adapter (Pg. 9)
Adapter for the MRS Rail
6. Cable Management (Pg. 25)
Manages the cables of the Monitor for better
organization.
1 Monitor Mounting Adapter
VESA LCD mount shown, other options available
2 Monitor Head - Rotation
Monitor Rotation Adjustment
3 SSM Joint
Rotates the Monitor Head to the desired position
4 Mounting Adapter
MON adapter shown for MRS rail
5 Cable Management
Manages the cables of the Monitor for better organization
6 Monitor Head - Tilt
Tilt Adjustment Handle
1. Installation to Structure
2 x 1/4-20 Set screws
Use 1/8" (3mm) hex key
to tighten
*WARNING: Never attempt to mount or remove the arm from the rail when a monitor is installed.
*WARNING: Support SSM arm until the set screws are tightened, SSM arm can slide down when
set screws are not tightened.
Toll Free Tel: 1.877.264.2697 l Tel: 905.763.7778
Fax: 905.763.8587
Medical Facility Responsibility
6
MRS Rail
1
2
3
4
5
5 6
2. Installation to Monitor
Insert screws through M4 holes
into back of monitor (4x)
*
*
LCD mount shown, for other monitor styles, refer to manual.
*
Hex keys (1/8", 3/16", M3, M4) - 1
Philips screw driver
Socket wrenches (12mm, 1/2") - 1
Adjustable wrench
*
Not provided by Amico
www.amico.com
Amico Accessories |
85 Fulton Way, Richmond Hill
Ontario, L4B 2N4, Canada