Brother GTX-4 Setup Manual page 35

What to do in the White Ink Pause Mode
For the White ink pause mode, perform the following steps
using "GTX-4 Maintenace".
Menu name
[Initial settings after
1
head replacement]
2 [Firing Adjustment]
[Platen-rolling
3
adjustment]
4 [White/Color Alignment]
[Setting of the time
5 displayed on the nozzle
check pattern]
When in White Ink Pause
Mode
Performed for color head
only
Upon completion of color
head setting, click [Cancel]
to close the maintenance
tool once and then start it.
Then proceed to the
following steps.
Performed for color head
only
Upon completion of color
head setting, click [Cancel]
to close the maintenance
tool once and then start it.
Then proceed to the
following steps.
Performed
Not required
Performed
For information on the White ink pause mode,
see "7-3. What to do in the White Ink Pause
TIPS
Mode" in the Instruction Manual.
4) When the completion screen appears, click [OK] to finish the
operation.
If you want to check the value you have set, do
not perform the above procedures as a means
to verify them. The setting will be reset and
returned to the initial value.
TIPS
To check the value in a proper way, refer to the
Instruction Manual.
26