Brother GTX-4 Setup Manual page 15

Cable clamp
This is used to put the cables together.
Filter cover and Fan filter
Waste ink tank
Fix the waste ink tank to the table leg or the like by using two
pieces of string, etc. Insert the waste ink tube and the waste ink
X0023
tube fixing rubber.
The waste ink tube contained in the waste ink
tank should be cut down to around 1.6 to 2 in. (4
to 5 cm) remaining just inside the tank. If the tip
of the waste ink tube is immersed in the liquid, it
will prevent the smooth flow of the waste ink, to
disable the ink suction operation of the head
IMPORTANT
cleaning function.
Avoid placing the waste ink tube horizontally as
much as possible, and be sure not to let it bend.
Otherwise the waste ink may have difficulty
flowing through the tube.
Install the waste ink tank in the front, because it
must be emptied when the waste ink is full.
TIPS
X0024
X0292
6