Brother GTX-4 Setup Manual page 21

3
Filling the cleaning solution
FULL
LOW
Pull out the cleaning liquid tank from the side of the printer;
enough to open the lid of the tank and fill the tank with the
cleaning solution until reaching the "FULL" line.
When filling is completed, close the lid and slowly push the
cleaning liquid tank back inside the printer for storage.
When you pour the cleaning solution, be sure
not to exceed the "FULL" line.
IMPORTANT
After filling the cleaning solution, make sure to
push the cleaning liquid tank in to the end. The
cleaning liquid tank that is not properly inserted
TIPS
causes an error and disables printing.
4
Ink cartridge setup and installation
Install the ink pouches into cartridges by referring to the
illustrations on the label located on the ink bay cover of the
machine.
If you are not using white ink and using only
color inks for printing, install a maintenance
solution pouch instead of a white ink pouch,
TIPS
referring to the procedures from step 2.
1.
Since there is a component within the white ink which becomes
deposited, please be sure to shake the ink pouch before it is
taken out of the box.
X0025
Hold each edge of the carton containing the pouch tightly and
shake it 100 times from side to side.
Next, turn it upside down and shake it 100 times.
2.
X0016
12