Diagnostic Leds And Reset-Pushbutton - Bosch Rexroth IndraDrive Project Planning Manual

Rexroth IndraDrive
8.5

Diagnostic LEDs and Reset-Pushbutton

Reset-Pushbutton S1
Diagnostic LED H2 (green)
Diagnostic LED H3 (red)
DOK-INDRV*-ADDCOMP****-PR02-EN-P
DC Bus Resistor Unit HLB01.1C and HLB01.1D
Fig. 8-20: Diagnostic LEDs and Reset-Pushbutton
Is used for resetting errors.
State
blinking
steady light
State
blinking
steady light
Meaning
device is ready for operation and U
device is ready for operation and U
Meaning
overload prewarning at 90% utilization
overtemperature prewarning
overload, overtemperature, internal error
8-15
hlb_S1H2H3.eps
≤ 50 V
ZK
> 50 V
ZK